Child Safety
Child Hand Rail
Child Door Safety
Child Protection
Child Support Rail
 
 

 

It easy to install as simple as 1,2,3 and 4 and then forget about it.

       Features:

  • Coated with thermoplastic manufactured for long term exterior exposure has well as providing a thermal barrier to give a ‘warm to the touch’ feel.

  • Can be fixed to lower door frame, internally (if door opens outwardly)
    or externally.

  • Can be fitted to the left or the right side of door frame to accommodate position of hinges.

  • One can be fitted on both sides of door frame without restricting access depending upon whether your child is left or right handed but the preference must be the hinge side of door.

  • Fixes to wooden, UPVC and aluminium door frames.

  • Fixes to front, back and patio doors.

  • Slim-line design - once fitted it is hardly noticeable.

  • Easy to clean and requires no maintenance.

  • 620mm in length (24.5").

 

Fit a Childs Hand Support Rail Today, its so easy!


INSTALLATION INSTRUCTIONS:

     Note: this product is designed to be fitted to the hinge side of a door.

(1.) (fig.1) Measure 1065mm (42”) from ground level. Apply pencil mark on door frame.
Place top of handrail on pencil mark. Mark ­first hole a minimum of 20mm from edge of doorside frame. The rail is approx 100mm wide, 50mm of which is to be screw fixed to solid doorframe, the remaining 50mm over hanging doorframe.

(2.) (fig.2) When all 4 holes are marked and positioned correctly, pilot drill 4 holes,using a 3mm drill.

  • If you do not have a drill, for wooden frame it simply means more wrist action. However, with UPVC and aluminium door frames drilling a pilot hole is essental.

(3.) (fig.3) Remove screws and caps from package and position handrail over pilot drilled holes (3a). Locate predrilled holes in rail (3b). Position screw cap washer’s (3c). Align screws provided (3d).

(4.) (fig.4) Using a hand held screwdriver begin fixing rail to frame, being careful not to over tighten screws, especially when using self tapping screws into UPVC, and aluminium door frames.

                     fitting diagram

  • When fitting your Child safety hand rail it may be necessary, if your door frame has a rebate to insert spacers (preferably saddle washers) that can be purchased from any D.I.Y stores.

rebate door frames image

Rail Price

FREE Post & Packaging

as seen on tv

Helping Us Helping You Helping Your Child

 

 

colorful hands

 

new image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Child’s Safety Zone Ltd accept no responsibility for any loss or damage suffered by any person or property as a result of the fitting, use or misuse of this product. In the case of any defect in the product, Child’s Safety Zone Ltd liability should be limited solely to the replacement of the defective product.

 

Design Protected & Patent Uk & Europe Pending
Childs Safety Zone Ltd. Registered office: 34 Bridge Street. Hereford, HR4 9DG UK.